Support F.A.Q.

Support FAQ

Q: "I want to buy your firearms, but can't find them in stock at stores around me. What do I do?"
A: All of our products have been extremely popular this year, especially our pistols and rimfires. While we're bringing in record numbers of firearms, the demand is seemingly endless. We're getting shipments from the factory weekly and fill the oldest orders in our system first. Firearms will be showing up in distribution, it's just a matter of finding one that's not destined to fill another customer's backorder. Expanding your search outside of your local area is a good idea, as most dealers are willing to make the sale and then ship the firearm to your local FFL for the transfer to you:
Q: "Can CZ rifles chambered in .223 fire 5.56 ammunition safely?"
A: All of our .223s will happily eat 5.56. Since our factory is in Europe, we build everything to CIP spec, which doesn’t differentiate between the two cartridges and just has the higher pressure as its standard. So the CZ .223s will shoot everything from the cheapest Russian steel to match .223 brass ammo.
Q: "I can't find a holster for my CZ pistol. Do you know where I could get one?"
A:Yes! Click here to download the CZ-USA Holster Database. Use the filters to sort by model, caliber, manufacturer, color, etc.
Q: "Can my CZ pistol shoot +P ammo? +P+?"
A: Just like in any pistol, +P ammunition will accelerate wear on moving parts. It’s ok to use, we just recommend using it sparingly. The only ammos we don’t warranty are +P+ (since they have no spec to be held to) and handloads (since human error can be a factor).
Q: "My buddy's gun says PCR on the slide, but mine says 75 Compact D. What gives?"
A: The factory has multiple designations for the same model, depending on where it's intended to be sold in the world. High demand here in the US means we'll take any overruns from other markets we can get our hands on. They might have different markings on them, but they're the same gun.
Q: "I ordered an over/under shotgun and it has a blonde stock. Why the different color wood than the picture on the website?"
A: The factory stains all stocks based on what they feel will emphasize the strengths in the grain. That means some stocks will be blonder than others, while some can be chocolate brown or even reddish in hue. It all just depends on the wood blanks used for that run of stocks.
Q: "Will the 453 trigger work in a model 452/455?" 
A: No, the inletting/milling of the 452 and 455 receivers will not allow the installation of the 453 set trigger. For 2013 there is an accessory single set trigger for the 455.
Q: "What rings do I need for my rimfire rifle? " 
A: All 455s have 11mm dovetails. Beyond that, the dovetails might be 11mm or 3/8" depending on whether the platform was developed for the US market or the European market. The foolproof way to tell is to take a measurement. 3/8" dovetails will measure 0.5"/12.7mm at the top/widest part of the dovetail. 11mm dovetails will measure 0.433"/11mm at the top/widest part.
Q: "How do I know which choke is which?" 
A: Our choke tubes are marked on the muzzle end with a series of notches. The more notches, the bigger the inner diameter of the choke and the less constriction it puts on the shot. 1 notch is Full, 2 is Improved Modified, 3 is Modified, 4 is Improved Cylinder and 5 is Cylinder.
Q: "What choke tubes work with my CZ shotgun?" 
A: CZ-USA carries their own choke tubes including standard and extended, silver and black. Trulock and Carlson's also make tubes for our guns.
Q: "Does CZ offer a skeet choke?" 
A: Skeet chokes can be bought from TruLock or Carlson's.
Q: "I cannot find an item on the online store that I saw before, is that product discontinued?" 
A: If an item no longer appears on our website, that generally means that quantities are low, or the item is backordered. When the item is in stock, it will reappear on the website.
Q: "Is the CZ100 laser available?" 
A: The laser sight for the CZ100 is no longer in production. They are no longer available.
Q: "What year was my firearm made?" 
A: Each CZ firearm has the year of manf. stamped on the firearm itself. Pistol marks are located in a small oval behind the extractor/ejection port. It will be a 2 digit code indicating the year it was manfactured. Rifles generally have the manf date stamp on the right side of the action, slightly behind where the barrel threads into the receiver. The rifle mark is a proofstamp along with the 2 digit code.
Q: "Will a CZ 75 magazine work in a CZ 85?" 
A: Yes, the CZ 75 and 85 are basically the same pistol, the CZ 85 just has ambidextrous controls
Q: "I bought a CZ 75B but my friend has a CZ 75. What does the B stand for?" 
A: The B stands for "firing pin block safety". The block guards against accidental discharge by "blocking" the firing pin at all times unless the trigger is pulled.
Q: "Why won’t the magazine fall free from my CZ 75?" 
A: The CZ 75’s and 85’s have a "Magazine break" to reduce loss of magazines, (the CZ 85 Combat has a free fall mag.). This "break" is a flat spring located in the rear of the magazine well. It can be replaced with a "free fall spring" or modified by a gunsmith. The gun should not be used with the spring removed.
Q: "Are there any night sights (tritium) available for CZ pistols?" 
A: Yes, we currently have fixed night sights for the CZ 75/85 family, CZ 83 and the CZ 97 B.
Q: "I bought a CZ 527 and want to mount a scope, but there are no holes for attaching bases. What can I do?" 
A: CZ rifles feature a "Dovetailed square bridge" design, this means the receiver has a large dovetail on both the front and rear bridge. To mount a scope you simply mount the ring right to the rifle, one of the best systems around. Rings are available from CZ-USA, Warne and Alaska Arms.
Q: "What is the finish called "Black polycoat?" 
A: Black polycoat is an electrostaticly-applied powder coating that is then oven cured to a hard shell. The coating is applied over a Parkerized or Phosphate finish which is very corrosion resistant in itself, the parts are then racked, given a negative charge and sprayed. This charged attraction literally draws the coating to the parts, giving the parts a uniform finish and reducing overspray. The parts are cured in an oven, producing a tough finish that meets Mil. Spec.
Q: "The bushing on my CZ97 doesn't seem to be tight when the notch is in the 6 O'clock position, is it timed correctly?" 
A: Yes, the assembly notch should be able to "time" to about the 7 O'clock position when turned in hand tight, then back it off to line the notch up with the spring plug and assemble per the owners manual.
Q: "Why are CZ rifles so accurate?" 
A: All CZ rifle barrels are gun drilled, reamed and lapped, then the blank is Hammer forged. After Forging, the barrel is honed in a power honing machine, this process removes any roughness which may cause copper fowling and therefore poor accuracy, this kind of attention to detail is unheard of in the gun industry today.
Q: "What are the correct torque specs for the 455 action screws?"
A: The correct 455 torque specs for wooden stocks is 25 in/lbs.  
Please feel free to add any question by contacting us at